Tip:
Highlight text to annotate it
X
Hawx Dog & Gun product details
Just wanted to give you an introductory, a couple things about the new Dog & Gun product.
1. Using it in training mode
2. How to set your intensity dials. The first thing is
the Dog & Gun product was built for the hunters
and the DG Button really replaces
the transmitter in order to control your dog. So the first thing to do
is to be able to fit it onto your gun.
And this Barrel Clip...
there's some inserts in here, the first thing you do is try to clip it on
and obviously that's too loose
then what you do is put the next insert on, there's actually two of them.
For a twenty gauge like this
you can use both of them.
You just put it on
the barrel
and now you're ready to go.
In this part of the video I'd like to show you, if you wanted to add on for a
2-dog system,
or even a 3-dog system where you'd use three of the buttons
or even the 6-dog model,
how you would do that. First thing you do is... Hawx will send you a new
collar system.
you set the toggle switch, I've got this system set on the first collar with
the toggle switch up,
this one I'm going to set with the toggle switch down. So I put it in that position for pairing
I take my receiver and
I see that it's not on, and I hold it
until I get a red light.
The red light's now on,
I take my transmitter and I push the upper button
and the light on the receiver goes out confirming that it is now paired.
I can now
just push the button and - I don't you if you can see it
but the light
on the receiver
is now on, indicating that it's paired.
And you can add one, two, up to six collars on this system.
The next thing that I'd like to talk about is if you got a
new Hawx system
and you had a Dog & Gun button and you wanted to pair it,
this one we're going to pair is going to be on the continuous button
which is set up in this model (model number six), I believe
for the side (button).
In order to pair it, it's very simple
you basically go to the back, you put it into Dog & Gun mode
you push the button to make sure it's in Dog & Gun mode, and you can tell
that by a flashing light meaning that the Dog & Gun receiver is ready to
receive.
You have your
button within reach so you can do it, you take the mode button
you push it
until the green light comes on
then you
push the button that you want to synchronize it with
until it turns red,
and then you hold down the Dog & Gun button
for five seconds until the light goes out.
Now this unit is paired
with your
Dog & Gun transmitter,
and you're ready in the field.
Okay, one thing we'd like to show you is how to adjust your intensity dial
in the field, in order to
use the Dog & Gun product. Most of the time you'll be hunting
and Ben here, he is a level two
and we usually run him at that all the time, but we can adjust him
up or down in the field depending on
field conditions.
The way you do that is, you simply take the transmitter you set it to level two
and you push the button which it's been pair to on the Dog & Gun product,
you wait 'til the red light comes on
and goes off
and now this button
is set for level two in the field. You can now take your transmitter
and put in your pocket
any you're ready for hunting.