Tip:
Highlight text to annotate it
X
Taken the chance of this exhibition in Hungary Yamazaki Mazak decided to exhibit this model.
It's one of our most recent model which name is Optiplex.
Optiplex is one of the recent machine with a lot of technology concerning the resonator, the CNC and many other stuff.
I can say that this machine basically has two sizes 3 by 1.5 meters and 2 by 4 meters.
The machine is equipped as a standard with changing of torches and changing of noozles.
We have 2 torches and 8 noozles that the machine can change work in the best way all the materials, steel, aluminium and brass.
We have the possibility to install this machine in a fully automated system where we have a stocker, loading and unloading system and maybe unloading stocker.
The machine is said also ecofrendly as a very good feature where can go completly to zero power the rezonator during the movement inbetween one hole to the next and the machine is also a kind of energy saving.
For examlpe I want to stand-by the machine for a while I can switch a button that reduce to just 800 W the total consumption of the rezonator against to the 12 kW in stand-by.
The production in a big FMS system so with stocker and the loader more and more the volume of nesting of the parts become less and less and less.
So many time the customer buy the macine as a stand alone machine and they cut may be one plate of a 8 mm, the next plate with may be 2 mm, and next will be aluminium, 3 mm.
But the machine is suitable for this kind of job because just you put the plate, you put the program in, the palet change and automatically the torch and noozle change and the machine is ready directly to cut.
So the set up time is completely minimised to zero.
So this machine, again Optiplex being one of our latest machine as also one of our latest CNC.
The CNC is named preview 2.
Preview 2 because the machine is analysing the program in advance and knows where it can accelerate and decelarate.
Knows if there are any inconvenients in the program and mistake in the program advising you before the start.
This also allowed us to make very detailed and precise maintenance of the machine because all of the data are memorized in the CNC and we have a history of anything happening in the CNC.
The Preview also offers good graphic in order for the customer to understand the program is correct, the motion of the torch is correct because everything would be evidence.
Not just the shape but also the movement of the torch is going to see, in fact that we have a 2D graphic and 3D graphic avaliable to see if the program is really correct.