Tip:
Highlight text to annotate it
X
Hyiodine package contains one bottle of Hyiodine and a spike.
Take the white plastic lid off the bottle and remove the spike from the foil.
If available use rubber gloves in order to eliminate risk of bacterial contamination.
Clean the uncovered plug with a disinfecting agent.
Remove the protective cap from the spike and stab it into the rubber plug.
Open the spike and insert the syringe inside.
Turn the vial up and withdraw the needed amount of gel into the syringe.
Close the spike in order to use Hyiodine repeatedly.
Apply the gel on the gauze and rub it in your fingers properly.
Check if the gauze is well saturated with the gel by squeezing the gauze in fingers.
It should be possible to squeeze small amount of the gel out of the gauze.
The dressing is ready for application to the wound.