Tip:
Highlight text to annotate it
X
Quick video
basically there is a noise in the rear of the elliptical
This is a
Life Fitness
95 TI
let me just
back out a little further here so you guys can see this
ah..hopefully this is..
video looks a little weird here but
This is a Life Fitness machine, typical Life Fitness TI
and uh...
basically there is a noise in the rear
and uh...
just wanted to show you guys some of you guys are not familiar how to repair this noise but
it can be very simple
you need to have the
right tool, the right alen wrench
and the noise is usually in here
so...
this metal piece
basically
this L-shaped metal peace
rocks
that whole arm rocks and
causes a little noise when you walk on so
there are two allen screws under here you need to tighten so
if I zoom in here you
might be able to see it
thats one of them and
if you look closely you can see the other one on the bottom there
so there are two allen screws, loosen them up
use the screwdriver
uh... like a flat point
screwdriver to kind of uh...
stick it in there
what you do is you stick it right between there
and uh...
and then
once you
get the screwdriver in
then you tighten
so
kind of like that
so you breached that screw driver in there
and then you push as hard as you can
towards the
inner
uh... sorry, you pull the screw driver out towards you you
so you push that race
towards the inner
once you get it really tight
uh... while holding the screwdriver you would come back down here
you would tighten these..
little
allen screws here
and if you get it right
you should
practically eliminate all the
noise
a from this machine
uh... so hopefully that clears up a any problems like that some of you may have.