Tip:
Highlight text to annotate it
X
(text on screen): www.Brick-Anew.com, No Hassle Returns, Satisfaction Guaranteed, Since 2001, 800-897-7175
Here's how to install an overlap masonry door.
First, we will install the brackets. As you can see, one of the brackets is already installed.
The brackets will go on side panel.
Please note, the mesh curtain is installed onto the back of the glass door frame before the frame is installed into the fireplace opening.
It is important as to where you position the screw and the bracket.
If you need to, you can loosen the screw, move the frame in or out, to make sure that it's level.
Then retighten the screw at the proper location.
As you can see, you can take the bracket and flip it around this way, or you can turn it around and put it on that way.
You can get more or less overlap, depending on what you need.
Once you have the four brackets installed, the door would be ready to put in.
(Text on screen): Putting the Doors into the Frame
Here's how to install the FS2 doors into the frame.
First, insert the bottom pin into the bottom clip. Then, tilt the door until you can get the top pin into the top clip.
Now, we'll do the right side.
If your installation is a bit off at the bottom, simply loosen a screw in the bracket of the frame.
Move the frame in or out to the proper location and retighten the screw.
(text on screen): www.Brick-Anew.com, No Hassle Returns, Satisfaction Guaranteed, Since 2001, 800-897-7175