Tip:
Highlight text to annotate it
X
Hey Youtube, today we are going to learn ..
how to remove the Evo X original / standard stereo
uh...
the stereo is also identical with the lancer ...
from 2008 and forwards ..
and the ralliart version as well.
So, follow me and I'll teach you how to remove it in less then 2 minutes.
Alright, so once you're in the car it's ...
pretty much just straight on.
So let's open up a glove box here ..
and squeeze the glove box togheter ..
so its loosens.
This will give us more space so we can unscrew this phillips screw ..
over here.
So just take a phillips screw driver
and ..
remove the screw ...
and keep it in a safe place.
like the mugholder,
and ..
let's remove this trim panel ..
over here.
It can be tricky sometimes,
But just take a hold of it ..
at the bottom and drag ..
and it will loosen.
Two clips.
Right so, unscrew this ..
phillips screw,
that holds the trim panel.
And keep it in a safe place,
mugholder = safe place.
Alright so here comes the tricky part, we will now remove this ...
trim panel.
You have to be careful because it can bend easily and crack so be ..
careful.
Place one hand here ..
so it won't bend.
And take ..
the other hand and pull.
Start from the passenger side and move your way over to the drivers side.
and remember to be careful so you don't crack anything.
This part is very expensive.
Keep it in a safe place (Wont fit in mugholder = place in backseat)
Alright, So now we will remove this ..
dash.
Over the stereo and the warning triangle, passanger seat belt and airbags warnings.
So put two fingers here at the ...
one at the left side bottom ..
and one at the the right side bottom.
And do a gentle push
*Sound of success*
or pull.
And then the clips on the backside will loosen up.
And then we can grab it ..
in the middle ..
and loose those clips. And we are off!
Okay!
Remove this harness wire,
To the warning triangle and passenger airbags and seats.
Can be tricky sometimes.
There we go.
And ..
Stash away the dash.
Alright
Now we got four phillips screws,
One here, one here, one in here and one here.
So ..
Let's remove them as well.
And release the head unit.
For some reason I'm missing one screw. *Swedish giggle*
.. And pull up the head unit.
remove the antenna plug.
And the two ...
wire harnesses
And your all done!
That's how you remove a evo x/ lancer / ralliart ..
stereo in ..
just under two minutes.
Thanks for watching and please ..
subscribe if you like it stay tuned for part 2 ..
Where we are going to install a ..
Single or double DIN Stereo ..
So stay tuned and thanks!