Tip:
Highlight text to annotate it
X
Here we are in the home of a Mr. a, what’s your name again?
Baby: In auditable, Payton. Dark? I thought your name was Payton.
Baby: Its George. George, anyway, here we are in George’s
bathroom and George’s bathrooms got lots of problems here.
The way this tubs designed, the water ran behind the joists and damaged the floor and
rotted it out over the years. Its been probably been about ninety years since this house was
built. So its rotted out all kinds of things around here, and we’re going to show you
a way you can use some plastic moulding that will keep it from going over the edge and
doing any more damage so that we can fix the floor and not have to worry about anything,
so there, we’ll be right back. Now then, what we’re going to do is, we’re
going to put this new kind of moulding down, inside the back of this and we’re going
to keep it mounted with silicone, and we’re going to cut it and bring it around this edge
right here and try and tuck it down inside the back of this so that, no water can get
past it, and we’ll stop down here close to the corner.
So what I’m doing is I’m a cutting this moulding so that it will turn a corner, I
want it to follow that bend as best it can, lets see if ….
Baby: Jerome Yes sir,
Baby: Coke. You’ve got coke?
Baby: I got lots of coke. You’ve got a coke?
Baby: yes Ah good, yea so that’s the way its going
to fit. This stuff’s so easy to work with you can
just attach a new piece to it. Cut it off a little bit longer than we need
anyway, see if we can get it up under that, Real tight fit, there we are. Now, all we
need is a stapler and we can staple this, and we’ll silicone it in.
We’ll just silicone that in there too and staple it behind there, and once the silicone,
nothing will move. Since this is all rotted out here, right, take a screwdriver, and carve
some of this rot out. Two 45s make a 90 degree corner.
Regan: Let me see that. Pardon? I’m going to make a 90 degree corner
out of this, by taking that little chunk out, in fact I may as well take the whole thing
off and just say to heck with it. I’ll just take the whole thing off, all
you have to do is score it the first time, and then, it comes apart real easy.
Now, so we’ll staple this in place and then fill it with adhesive, my 90 degree corner
like this, between itself. Ha ha, you’re not having fun in there, are
ya? Your not supposed to be in there having fun.
The tub *** disappeared completely, not that there was enough.
I just want to make sure that its in her as much as humanly possible.
Just put more adhesive on, right.