Tip:
Highlight text to annotate it
X
Thank you for purchasing a Jaxx. The first thing you need to do is place your
Jaxx in a desired location, such as a living room or bedroom.
Empty the shipping container and make sure all the assembly items are
included. You should have foam capsules, and a plastic
bag containing instructions, the inner liner, and the outer
cover. Make sure to read the assembly instructions
or refer to this video when assembling your Jaxx.
Find the white inner liner and remove it from the plastic sleeve.
Completely unzip the liner open it up and lay it on the ground.
Place one of the foam capsules into the liner. Now locate the pull
tab labeled #1 then begin to unwrap the foam capsule.
Rotate the capsule inside the liner as you remove the tape to prevent
any stray foam particles from escaping. After the first tab is removed continue to
remove the tabs in numerical order. After the capsule is unwrapped, remove the
plastic bag surrounding the foam. Then remove it from inside the liner.
Repeat as necessary with any remaining capsules. Once all the plastic has been removed, zip
the inner liner closed and twist off the childproof zipper.
Once the liner is sealed, you'll need to stop. Allow the foam to
expand for 24 hours before continuing. Once the foam has began to expand, it is time
to break up the large chunks. Do so by kneading and flipping the Jaxx allowing
air to penetrate the foam until it is completely broken apart.
Now it is time to place the outer cover over the inner liner.
Simply rotate and flip the product to facilitate this process.
Zip the outer liner shut, then fluff up the product by flipping it repeatedly.
Congratulations, you have now completed the assembly.
It may take up to an additional 72 hours for the foam to expand to its
full potential. It is always a good idea to occasionally knead
and fluff your Jaxx to keep it as comfy as possible.
We hope you enjoy your new Jaxx purchase.