Tip:
Highlight text to annotate it
X
Hi! It is Steve from PartSelect. Today we are going to show you how to change the lint
filter cover on your dryer and it is a really easy job and you won’t need any tools. Let
me show you how we do it. Now to do this repair, we will begin by opening the dryer door and
we are just going to reach in and grasp the cover of the lint screen, pull it out as an
assembly. Now we will remove the old lint screen from the cover. It is held in place
with a couple of little tabs. There are two positions here that are reinforced on the
screen that we will simply squeeze together to release. We should also inspect that lint
screen and make sure that there are no cracks where the screen meets the plastic frame.
If everything is good, we will keep that. If not we will need to replace that. So we
will simply take our new cover and the lint screen and then we will depress the size where
those reinforced are. Make sure that it hooks behind the little tabs. And then before we
install it we will also check the opening at the mac of the drum and make sure that
that we have vacuumed out any excess lint that may have built up in there, which will
make the dryer run more efficiently. And simply grasp the two hand-holds, snap into position
and our repair is complete. I told you it was an easy job. Thanks for watching and good
luck with your repair.