Tip:
Highlight text to annotate it
X
Hi, this is Jon and in this clip we will be installing our door sweep. If we take a look
at the very bottom of our door, we have a fairly significant gap where wind and air,
or even bugs could get in. To remedy this, our door has come with a sweep and a rubber
gasket for that sweep so that we can form a nice, tight seal on the bottom; so no air
or bugs or anything can get in. The first thing we need to do is feed our rubber gasket
into the channel on our door sweep and we're just going to fit it all the way down. Then
we're just going to trim off the extra. After that, we're just going to take our door sweep
and our door and we're just going to snap that in place at the bottom.
Now our door sweep does adjust up and down depending on how much gap you need to fill.
So what you need to do is close your door and set your gap correctly and then put in
your screws. And of course when you're done, you will want to double check the fit of your
door sweep.