Tip:
Highlight text to annotate it
X
Today on this 2005 Ford F-150, we are going to be installing the Bull Ring Heavy Duty
Retractable Anchors, part number EM4001. To install these retractable anchors we first
need to locate our stake pockets on the vehicle. On this particular model we are only going
to be installing 4 of the retractable anchors because we do have a tool box at the front.
In fact you will notice on the Ford F-150 the stake pockets actually have covers on
them, so we do need to remove those first. I am going to take a flat head screw driver
and pop those right out. :26 Then we will take the anchor itself, if you
look at it here, we have three individual sections. The bottom piece that is attached
to the ring, the middle black section which is actually going to clamp to our stake pocket,
and then a plastic cover. To install it, its very simple. We just want to take and angle
both the bottom yellow piece and the black mounting plate and angle those. We are trying
to angle them under the lip of the stake pocket. We want to center
that in the stake pocket hole. :57