Tip:
Highlight text to annotate it
X
Sorry for my bad English
Basis is the portable circular saw PKS 55a from Bosch.
The portable circular saw can just be used for pieces that are bigger than 20 cm. So I decided to make my own table saw. 4 00:01:00,000 --> 00:01:08;000 Under the table surface: The circular saw mounted on the board.
A safty cover to protect the fingers mounted on the splitting wedge.
Guide for the Crosscut and the Ripfence.
Crosscutfence with screw variable for angular sections.
Ripfence in the gap between the board and a 20x20mm square tube made out of aluminium. 9 00:10:20,000 --> 00:10:40;000 To turn the saw on and off I added a switch and two sockets.
The saw is attached to my workbence with two clamps.
The push stick to protect your fingers.