Tip:
Highlight text to annotate it
X
Hey. What's up, guys? David Glenn of Davidglennrecording.com and
Theproaudiofiles.com. This is part two of how to mix acoustic. I've got the
lead vocal all pulled up and ready to go. If you missed part one, be sure
to check that out after watching this one. We've covered the acoustic
guitar. The song is called "Chosen." It's by my buddy Jaris Cole. We're
going to dive right in. So, here's a snippet of
the chorus.
Alright. Very cool. So, diving into the lead vocal. The first thing I want
to talk about with you guys is controlling the breath. So, the first thing
I've done is I've taken... In ProTools, we have a clip gain. I don't know
what it is in Logic or if it exists, but I've gone down, and I've reduced
all the breath. So, you see these lines right here. Let's take a listen to
that example. Solo him out.
So, it's not going to be too dramatic of a difference. Jaris is a great
singer. He controls himself very well. Aside from his sibilance, he's very
sibilant. The breaths are all nice and tight and well-performed. Not to
spend too much time on that, but I do go down. I highlight those, and I
pull them down. The second thing I want to talk about is the clip gain with
phrases. Now, since doing this video, I have become a little bit more OCD,
where I will go in, and I'll be more OCD with the vocals. So, what you're
going to see here is I've gone... As a matter of phrase by phrase, I'm
treating the vocal with clip gain, additive clip gain or reducing the
volume. In this case right here for this line, you'll hear it coming out of
this section and we'll skip ahead to this.
So, he got a lot louder, so I pulled that down quite a bit. You'll see
section to section. I don't track with... I have a UAD Apollo. I don't
track with compression or anything that often. Sometimes, I'll use it like
in 11-76 with the UAD stuff for peak limiting, but for the most part, I
track dry. So, then I go in with clip gain, and I use that, and then a
mixture of that and volume automation to kind of balance and level out the
vocal passes. I'm not going to spend too much time on the in-depth clip
gain, but just to see, you can see I've gone in and raised and lowered the
level of the clip gain to kind of help smooth the vocal out. Jumping into
the EQ chain here. We've got the Fab Filter Pro Q. Love this plug-in. I've
got just some minimal stuff going on, doesn't look like anything to write
home about here. My lovely mother hooked me up for Christmas with some plug-
ins, and this happened to be one of them, the bundle from Entaries [SP] and
the Mic Mod EFX. I'm going to show you a before and after of this, because
whether or not it's doing anything magical or not, I don't know if it's
making the full 14 sound like a U-47. I'm not going to argue you on that,
but I did like the tube saturation that it gave. So, let's take a listen of
that before and after. Let's solo it, and actually, let's move to another
section in the song. Maybe something back here. Yeah. The chorus is cool.
Right there. Let's hear that
Alright. Now, with it. One more time without it. With it. Yeah. So, if you
guys are hearing that, I liked what it did. So, I kept it in there, but I
was definitely experimenting with this one. The next one I'll pull up is
what we got here, the de-esser. Like I said, Jaris is actually extremely
sibilant with his S's. They can get pretty harsh sometimes, so we have to
work on the mic technique sometimes with the S sounds. Then, definitely
using a de-esser, and I'll also go down, and I'll draw them down, depending
upon the song that we're working on. But, that's taking care of that. I
don't know if there's anything to really dive in deep with that. But then,
I will say I de-ess early in the chain, if not first, and that's reducing
those. Then, if I over-de-ess, I can go back and tweak it, or I can add a
little bit of clarity in the upper end later, but I do de-ess first. Then, it
looks like we've got the 11-76. This is going to probably... If I hit play,
I've pulled this up from an older session, but controlling the peaks a
little bit. Let's see.
And another here maybe. So, yeah. It's just kind of helping to control it a
little bit, nothing too fancy. You can see I got a slow attack, kind of a
medium to fast release. Then, moving on from there, I've got a parallel
compression chain. I've got another video series on how I use AUX tracks to
give control when I do parallel processing. That's available if you guys
want to check that out. I get a little bit deeper into the plug-ins I use
on my parallel chain, then I use what's called a lead vocal level on this
song. If I remember correctly, when I mixed this, I threw a C4, a wave C4
or something on there. The way I typically do my parallel chain is I'll
take the dry, unprocessed vocal, and I'll send that to a lead vocal level.
Then, the parallel compression chain also goes to the lead vocal level, and
you got the blend. Then, you pull it up. You kind of blend in the parallel
compression. Then, I control it with the lead vocal level one. This song,
if I remember correctly, I put a C4 on or something, and the phase got all
out of whack. I think it was a delay compensation bug. So what I did was I
went back to kind of what Dave Pensado [SP] does, and he sent the parallel
chain out to all EFX or all vocals, whichever one you pick. But this is an
older song, so I do still do what I taught in the other video. I highly
recommend it, but like I said, there was a little bug when ProTools 11
first came out. So anyways, [??] moving onto the parallel compression. I've
got the waves, CLA 76. Usually, I will follow that up medium attack, fast
release. Then, I'll generally follow that up with an L 1. That's definitely
the case here. Actually, if I remember, this is actually a thicker part of
the tone than the dry. A lot of times, I'll try to get that dry very
present in the blend, and then pull the parallel compression in. I think
this is one where the parallel compression chain is going to be more
dominant in the sound.
OK. Now, what I want to do is mute the parallel compression chain. Let's
see how much of that dry signal was in there. Back in. Yeah. So, most of
that tone is coming from the parallel chain. That sounds good to my ears. I
liked it, so I ran with that blend. I do see the EQ. It's a little bit
dramatic. I've got the 1K region. It was about 1.3, where I felt like that
sounded good on his vocals. So, I boosted that up. That's typically in area
one, 800 to 1.2, somewhere in here that I'll sweep through and find a sweet
spot for the vocalist. I'll pull that up a little bit. [Clearing throat].
On his voice, I, for some reason, maybe went back and did this. I don't
typically lift too much in the 2 to 4K region, but I did that. Then, I've
also added some classiness up in the 10 K range. A couple of frequencies
that kind of bothered me, and I'll use the Pro Q. If you haven't seen that
before, let me show you a demonstration of how you can take and sweep
through frequencies. Let's take this band here.
Going to sweep through. So, that was a little snippet of that. Then
something I'm really excited about, as an Apollo user, UAD, they recently
released this, actually just a few days ago, the preamp emulation of the UA
6-10 B. So, this vocal chain, I already kind of mixed it and set it up. But
before I pulled it up to do the tutorial, I thought, "You know, let me see
what I can do with that." I pulled it in, and I really liked it. So, I left
it on, and we'll do an AB of that. Let's find a good section here. Let's go
to the end, where he kind of gets a little more energy. Let's go right
here, and let's here before. And after.
OK. It's very subtle, so let me do this. Let me play it, and then I'll
bypass it halfway through. It's out. Back in. Cool So, I liked what it's
doing. It's adding some character to it. I'm not mad at that. Then, you can
see I've got some effects. I'm using a very minimal amount of effects. I
wanted to keep this kind of dry. This is more of a demo songwriting track.
I kind of give this one away, kind of build up some fan base, sent it out,
blast some emails, and do like a teaser before we release a full radio
version of this song. This is an EP that I'm producing for my buddy and
give a shout out actually. Jaris Cole and the coproducer up in Chicago,
Victor Incarnacion [SP], working really hard. So, shout out to Vic. Moving
on. The vocal delay. Vocal slap, if I remember, I threw a Studer on the
back of the plug-in mix. Echo Flex. Maybe do a whole series on effects
here, but pretty much, I've dialed this in at about hundred, I'd say 160.
That's a lot higher actually than I usually will dial that in, but I've got
that sending to a vocal slap. Then, something cool. I can't remember where
I picked this up, but I'm throwing this Studer on the back end of my delay.
I've used, for those of you that have this, I've used a cassette deck
preset and driven the crap out of it, and then just pulled down the output.
Let me show you the difference between the... Let's pull the vocal slap up.
We'll solo it.
OK. So, there's no Studer on that slap delay. Now, I'm going to put the
Studer on, and let's hear what we get. Pretty sweet. Right? So, you hear
the driving, the artifacts, the distortion kind of kicking in. I really
liked it. I didn't bring in too much vocal slap on this. For this
particular acoustic track, I wanted to keep it somewhat dry, just more of a
feeling rather than hearing the delays or the reverb, but not a bad effort
with the Studer there. So, cool little trick. If you guys aren't using
saturation on the back of your delays or that kind of stuff, I recommend
it. The ENT vocal plate, pretty straight forward. Just kind of put them in
the same space that I put the acoustic guitars in. Let's hear that. That's
without it. Cool. And then, moving onto... I threw a delay on here, a
stereo delay. That is extremely light as well. Let's take a listen to that
and boost it up.
So, I just, again, was trying to create a space around the vocalist.
[Clearing throat]. You kind of hear a couple of those kind of trickle off.
It's a nice little effect for a little acoustic track. I tend not to get
too crazy with delays when I'm doing acoustic demos and that kind of thing.
The UAD dimension D is in here a little bit. Let's hear that. Without it.
Then, with it. That's it. I actually don't mind that whenever it's boosted up a little hotter. So, that's kind of a walk
through of the effects. That's the lead vocals. So, if you guys have
any direct questions, man, email me at David, at Davidglennrecording.com.
I'm trying to think of there's anything else I can cover on this
one, but it gets you started with kind of cleaning up the track, kind of working
through some of the breaths. Sibilance is something to pay attention to,
depending upon the singer. Compression to control the peaks. We've got
parallel compression in there. You saw the settings for that. I added some
saturation, some character. Man. So, if you guys have any more questions,
anything of what I'm doing here that you see maybe I didn't cover, feel
free again to message me. David, at Davidglennrecording.com. We'll see
you. Video three is coming and that's going to be on MS EQ-ing of the acoustic
guitar. So, we'll check you guys in that one.