Tip:
Highlight text to annotate it
X
Hello, and welcome to 80/20’s product highlight series. Today, we’re going to look at the
end fastener. What makes the end fastener so popular, is its hidden visibility once
secured into place. It’s available in fractional, metric, and compatible across a wide range
of profile series. The end fastener comes in two parts. You have the bolt, and you have
the wing clip. Now one thing you’ll want to keep in mind with the end fastener is your
bars are going to need machined. One with an end tap, and another one with an access
hole. For more information on end fastener machining services, you can check out the
80/20 product catalog. Now when it comes to installing the end fastener, it really couldn’t
be easier. First you take your bolt, and place it through your wing clip. You’ll take the
profile with the end tap in it, and place the end fastener in it. From there, you’ll
hand tighten it down, and you’ll grab your other bar with your access hole in it, and
slide it over the end fastener. From there, grab the wrench, put it through your access
hole, and tighten down the bolt. Once tightened, you have a strong, secure, hidden connection,
perfect for any clean-looking application. Hopefully you found this segment on the end
fastener helpful. For more information visit 8020.net, and make sure to subscribe to future
80/20 videos. And as always, make it a great day!