Tip:
Highlight text to annotate it
X
Hello everyone this is a tutorial on how to fix your broken dough roller. i happened to
break my roller last time. so, i thought about fixing it. there are the items you will need
a broken dough roller, 2 nut to tie around the open of the hole 2 nut washers flat washers...for
the both end of the roller to reduce friction while using it...you will need a wooden drilling
machine can be electric or manual... and then you will need a thin rod which has threads
around it and which can fit in the hole of the main base roller and make sure its popping
out on the both ends and make sure its equal on both sides but also make sure that its
not too long or not too short.... so, what i did was, made a hole on the handle with
a drilling machine and then i inserted the metallic rod in the main roller base and then
i inserted a ... first i inserted a flat nut washer and then the nut and tightly fixed
it together i did that on the ends and the final finished product was like this make
sure to keep the nut a little bit loose at the end so that its the roller base can role
easily and you can get this by trying once or twice i did it at once. (first attempt)
should not be problem. I hope you guys like the video and hope this helps you. Thank you!