Tip:
Highlight text to annotate it
X
Prepare the surface by removing anything littering the area to be worked on
The Decor Grip tub contains the resin and the hardener tins as well as the loose aggregate
Stir the hardener and resin individually, then pour the smaller tin into the larger and mix them together for 2-3 minutes
Once mixed pour the liquid into a roller tray and roller it onto the floor. This liquid acts as glue for the aggregate, so be sure to cover the floor completely to avoid any gaps in the coverage later on
To make life easier we applied it in sections
Scatter the aggregate onto the liquid and spread it with a broom. Don’t worry about loose material, as this can be collected later and reused
One tub will cover 5m²
Now move onto the next section. Once you’ve covered the whole area leave it to settle for 30 minutes
Sweep away any loose material and admire your new floor
It takes 16 hours for everything to set fully at 15°C and longer if the temperature is lower
The hardener resin mix will get hot and set hard becoming unusable after 20mins of being mixed. Be careful to leave this in a well-ventilated area and do not dispose of the mixture until it has cooled down and fully hardened