Tip:
Highlight text to annotate it
X
When you have a design on your screen and you want to see where it's going to sew, it's
always good to take time to check where the design corners are going to be. For example,
if I go over to alt and I move the design down to the lower part, notice the needle's
off to the side, but the design is centered.
Do this. Take the time to touch okay. Okay has these little tiny arrows pointing into
all the corners. Right now, when I touched it, a little plus has marked the top left
corner of the design. Touch okay again and the needle moves to the top right corner.
Okay again. Bottom right and lower left. Then touch it one more time. That's when you want
to actually set up the design for say the center of your design.
You'll see the little plus there. Then use the outside arrows, left or right, to make
your design get to be exactly where you want it to be centered before you actually embroider.
Then once you've moved it, check it one more time.
I'm going to touch okay. I see that I'm around each of these corners and I'm exactly where
I want to be positioned. Last okay puts me right back to the center. Touch alt and you're
ready to push start/stop to embroider.