Tip:
Highlight text to annotate it
X
Hi, this is Vicki Walker from Expert Village. In this clip on how to make a butterfly chair
cover, we would be sewing the top sections of the seat cover together. I'm removing the
pattern piece that I have cut out. I need to put the right sides together and then pin
them before we actually start sewing that way we get a cleaner seam. We would worry
about the finishing of the seam later. We don't want the rough edges to show and they
would be finished off with a flat seam in one of the next steps we would be doing. Take
it to the sewing machine and get our seam started. I would be using a 5/8 inch seam.
I'm going to reinforce the edge of this seam to be sure that it does not come loose and
I'm sewing a 5/8 inch seam all the way down and we would be finishing the edge of this
seam in a minute to get rid of raw edges. You want to make sure to keep your fingers
away from the sewing machine needle. Almost done. I would reinforce the bottom edge as
well and that is all there is to sewing the seam for the top portion of our butterfly
seat cover.