Tip:
Highlight text to annotate it
X
So I'm going to start by laying out some example collaging with this mix medium that we've
created here. So now that it's been sitting for a minute and been moved around more with
a paint brush, which I actually tend to find after I used the pallet knife, works well
to brushing it out into a consistency. And basically you are going to work with laying
out the prepped adhesive onto one side. The difference here when you are working with
this as opposed to the glue stick is that you actually want it on both sides, you don't
mind if it's kind of all over because that's how we are going to end up working. The other
part to it is that when you are working on an actual area, you can lay it out on to the
actual surface of your piece as well. And you are going to continue to do this throughout
and I'll keep going over that again, and again as we move on. So I'm going to lay out plentiful
amount of on here, and a plentiful amount on one side and then I'll show you how to
lay it out after that. So just keep making sure it covers all end, from end to end, same
thing with the glue stick. You want all the way from end to end.