Tip:
Highlight text to annotate it
X
Down here, what I have for you, I've got, there's fur up here on the wood. I'm not sure
that you can quite see it but this is caused from the power washing. The power washing
rips this fur up on the wood and leaves it sitting there. If you stain it in this state
you are going to get all that fur area there and as that weathers off you'll get blotchiness
in your stain, and you don't want that. So all you need to do is just take a quick sand
brick, take it up and down, and just make sure that you get the whole surface area,
and that is really all you need to do. You can do that spindle to spindle, just keep
moving and do that all the way around. Now, the power sander takes off quite a bit more
and I'm going to show you that in just a second. But you have got to make sure you get all
your spindles on the sides and get your underneath support boards and the entire handrail to
make sure that you have got everything ready to go.