Tip:
Highlight text to annotate it
X
Hello everybody
in this video we show you how to make an Uridon
the tools we use are
external catheter, avaibles in pharmacies
scissors, lighter, iron wire and neoprene pieces
necessary to reinforce the hole where the tube will pass
ruining your suit and causing annoying infiltration
will use alcohol to clean the neoprene circles
and the points of the suit where circles will be glued
this cleaning removes the residual fat making good glue surfaces
this work will be done inside and outside the suit
apply glue on the rim of neoprene
and paste on the outside part of the suit
once dry the mastic, turn the suit and repeat the operation
wait for it to dry
this phase is the most delicate of all the work
with the lighter heat up the piece of wire
the high temperature will melt the neoprene burning the edge of the hole
this prevent the widening of the hole
during this operation, remember to keep the suit raised the hand
so as to avoid burning the opposite side
if the tube is soft use a piece of wire as a needle
the work is done
with this tool you can pee outside the suit
solving many problems
Stay tuned for new videos on
www.pescasubacquea.net