Tip:
Highlight text to annotate it
X
Today on this 2013 Honda Fit well be test fitting the Swagman XTC two bike carrier,
part number S64670. To begin our test fit well slide the shank of the carrier into the
opening of the hitch tube, line up the threaded pin holes, well thread our anti-rattle bolt
through the threaded pin holes and tighten with a wrench. Now lets go over some clearance
measurements to see how the bike carrier and the vehicle fit together. There is about 8
inches of ground clearance. The closest part of the vehicle to the closest part of the
carrier is about 5 inches. Weve added about 21 inches to the overall length of the vehicle.
To access the cargo area first put the wheel cradles and the mast in the down position
by releasing the three safety pins located at the bottom of the carrier. This will allow
you to have access to your cargo door. To load the bike, first make sure that the mast
is in its upright position then put the frame hooks to the top of the mast and undo the
cradles straps. Then sit the bike in the wheel cradles and tightly secure the frame hook
against the frame then secure the cradles straps. That concludes todays test fit for
the Swagman XTC two bike carrier, part number S64670, on our 2013 Honda Fit..