Tip:
Highlight text to annotate it
X
So, right now what we're doing is we're marking the outside edges of our already cut pieces,
so that we can grind them to their perfect smoothness and shape, to be able to adhere
them together with the copper foil and the solder. On some of your darker pieces of glass
like this, I know I've been using a black sharpie on a lot of these other colored glasses,
but some of the darker colors, you need a different color of sharpie. So, what I have
done in this instance, I've gotten a silver sharpie and gone around the edges, so that
I can actually see my marking, because the black is not going to show up very well. I
mean you can see this, I marked my piece number, I can see it because of the glare of the light,
it says ten, but when I go to get it up to the grinder, I'm not going to be able to see
that very well. So, I'm going to mark this one, just as I have the other, so that I'm
going to be able to get rid of all of my excess pieces of glass off of this particular piece,
of my butterfly.
And, there you have it.