Tip:
Highlight text to annotate it
X
Today I am going to show you how easy it is to change these locks. These have kind of
a quick nice and easy feature in how they slip together. So let me show you here. You
can see the slots in the back of this here. What you do is line up your post hole. You
can turn it so that it slides in and than this slips into place. Than you are able to
tighten the screws through here. So it is just a quick deal to get it going. So here
it is on the door itself. Taking off the old lock. All we have to do is loosen up the screws
on both sides. Than rotate it and pull the old one out. On the new one we will just pass
it through our holes. Like so and rotate in the new deal. Tighten the screws down on both
sides. And we are all set there. Ready to go. Now one of the most common causes of sticking
locks is if your screws are too tight. So if you see your post is sticking that would
be one of the first things to check. Either these two screws or these two screws may be
too tight so. Make sure our deal closes properly and we are all set there. Good to go.