Tip:
Highlight text to annotate it
X
In the Tylo range of control panels this is the CC50 panel. It's most commonly used for
sauna and steam and it can be set as various different panel
types according to temperatures and time. The panel comes standard
set as type 50 and they call this setting number 50. To change the panel type you can
only do it when the power is removed and applied again or applied for the first time. To go
through this we will just show you by applying the power
to the panel. It displays panel type 50, briefly, and then it goes into temperature. To change
the panel type you must press and hold the up and down arrows
within 60 seconds of applying the power and keep them held for six seconds.
Now you will see panel type 50 is flashing and we can change it, in this instance we
will change it to panel 59 and we confirm that by pressing the temp button
and it's telling us we just carried out that function. The panel is now type
59 and it will control the sauna heater at 110 Degrees maximum, with no timer function.
That means it only works via the On/Off button, the timer function
doesn't work. This is useful if you want to control it from a remote
switch or a computer at say a reception desk where you want to control it for various times.
The ‘light’ button obviously works the light, the ‘temp’
button controls the temperature and the ‘timer’ button in this instance has no
function. This is the CC50 panel which is most commonly used with a standard type temperature
sensor. If you have any further questions regarding this
panel please do not hesitate to contact us.