Tip:
Highlight text to annotate it
X
Kayfun Lite Clone from GD
Hi there.
Just sit down comfortably and let´s have a look at how to disassemble,
what it consists of, and how it vapes – Kayfun Lite Clone.
A paper box which is hiding:
set of sealing o-rings – wow... Plenty of them,
extra screws, screwdriver, wrench (we'll need that, I'll it right now),
two heating systems… So we even have our heating ready…
And the atomizer itself.
The atomizer consists of these parts:
a 510 drip tip, upper cap, one tube,
center connecting tube, bottom tube.
Well… And here we have a little bell hiding a heating system.
The heating system is accessible also just after unscrewing this bell,
so we can just remove the little cap from the top
and possibly do some dry heating, wicks adjustment.
Or adjustment of anything anyone may coil up here based on your taste,
because it is rebuildable.
Ok, what else do we have here:
two screws to fix the coil of the heating system,
this is the center contact insulated from the base,
the other contact, channels for liquid supply.
This screw serves for bottom filling,
you just need to unscrew it
and then you can fill your atomizer from the bottom with the needle.
My clumsy hands…
Ok...
There is another thing in this base which is an airflow hole.
It´s here.
You can adjust the amount of air with this little wrench.
So, this is the airflow adjustment.
Ok, we can put it back together now.
I just do it simply and now, from the top,
I will put one part of the coil to one liquid channel
and the other part of the coil to the other one.
And that´s it.
I think, in this case also 100% bio-cotton will be suitable.
Ok, the bottom ring, connecting, upper ring…
And somebody forgot something…
Now, it´s ok…
And upper cap with the sealing, and it´s ready.
Let´s see the size:
basic diameter 21,93 mm,
diameter of the top 14,09 mm,
length without drip tip 51,55 mm,
length with the original drip tip 73,8 mm.
Weight 84,9 g.
So, the atomizer is ready to be filled with liquid…
Which we will do by unscrewing this little screw
and from the bottom by a needle or a bottle with a narrow neck,
let it soak up for a while…
And then you can vape.
Kayfun clone is filled with liquid, put on my Natural and we can try...
And I don´t like having so easy puff…
So I need the little wrench from the accessories pack here…
Now it´s harder…
So, this is how you vape from Kayfun.
No problem, luxury, no question about that.
Enjoy your Kayfun and see you again someday at some of my videos.
For Gold Drive made by Vorel Vaping Film´s.