Tip:
Highlight text to annotate it
X
Hey, it's Mike from SWISCO.com, and today I'm going to show you the Swisco hollow-wall anchors.
For this exercise I'll be using a drill with a 5/16" drill bit, a Philips head screwdriver and a hammer.
To get started, take your 5/16" drill bit and drill your hole.
Then, take your anchor, fold it in the middle, inset it in the hole and tap it flush with your wall.
Insert the setting key to pop the anchor open behind the hollow wall. Be sure not to force or hammer the setting key.
Place your hardware over the anchor and fasten it with yours screw.
As always, thanks for watching. If you have any questions on the hollow-wall anchors or any other hardware, please be sure to visit us online at SWISCO.COM/DISCUSSIONS.