Tip:
Highlight text to annotate it
X
Hello, I'm Rob Parham and welcome to another edition of The Inside Track with Buffer Technology.
Today, I'm going to walk you through the installation procedure of the extractor upgrade kit.
We offer this kit for your AR15 and M16 rifles so you can install and thereby improve the
extraction of your AR15 or M16. First, as always, we want to make sure the
weapon is unloaded. We will then break down the AR 15.
Remove the bolt carrier. Once we have the bolt carrier out of the weapon,
the next step is for us to remove the bolt from the bolt carrier.
We will remove the firing pin retaining pin, remove the firing pin,
remove the bolt cam pin, then, simply pull the bolt out of the bolt
carrier. Now, we have to remove
the extractor from the bolt face. Simply push the pin.
And also, you can compress the extractor somewhat on the rear
to help the extractor pin come out of there. Then we'll remove the extractor...
and remove the extractor spring. We'll take the extractor upgrade kit
(and) remove the parts from the kit. We've got a spring, plunger, and an O-ring.
Take the extractor spring, insert the plunger into the middle of the
spring, insert into the extractor,
(and) place the O-ring around the spring. Then we will reinstall the extractor into
the bolt. Take the extractor pin and reinstall it.
Again, it helps to push on the rear of the extractor
to help line up the holes up as you install the pin into the bolt.
Next, we reinstall the bolt into the bolt carrier,
reinstall the cam pin, the firing pin,
and the firing pin retaining pin. Final step: put it back in the rifle.
Now you've just enhanced the extraction power of your extractor
on your AR15 or M16. Thank you for joining us on this edition of
The Inside Track. I'm Rob Parham.
You can find this extractor upgrade kit and many other firearm accessories at www.buffertech.com