Tip:
Highlight text to annotate it
X
Today on our 2012 Toyota Sienna well be test fitting the Rola 23 inch by 56 inch railed
cargo carrier, part number 59502. To mount our carrier to the vehicle well insert the
shank of the carrier into the receiver tube of the hitch, well line up the hitch pin holes
and secure the carrier with the standard five eighths inch pin and clip. Next well go over
a handful of clearance measurements. Weve got about 15 and a half inches of ground clearance
at the rear of the carrier, about six and a half inches of clearance between the closest
part of the carrier and the closest part of our vehicle. Overall weve added about 30and
a half inches of length to the rear of the vehicle. Weve got about 14 inches of space
between our tail pipe and the closest part of the carrier.
Keep this in mind when loading as you may experience some heat transfer. The cargo door
crosses over the top of our carrier about the 11 inch mark. Thats it for our test fit
of the Rola 23 by 56 railed cargo carrier, part number 59502, on our 2012 Toyota Sienna.