Tip:
Highlight text to annotate it
X
Hello. When I say Kanger ProTank
you'll think of the clearomizer with pyrex glass container,
where the coil is placed at the bottom.
And when I say Kanger ProTank Mini
you'll think of the smaller brother of the ProTank.
Today I'll show you Kanger ProTank Mini 2.
So let's take a look inside the box.
The box has standart KangerTech holographic sticker on it.
Here is small manual in english.
And there we have the atomizer itself.
Here is the bottom base with the eGo thread.
So the Kanger Mini ProTank 2 is designed for eGo threads.
Or you can use 510/eGo adapter.
In the box are two replacement coils.
We can measure the resistance.
So here it is around 2,7 ohm. It will change during the usage.
Somewhere around 2,6 - 2,7 ohm. Just roughly.
So we can screw the coil inside the base.
And here I have Kanger ProTank Mini 1.
This is Kanger ProTank Mini 2
They are quite similar.
But when I put them really close to each other you'll see slight difference.
And I'll tell what the difference is.
This one is demountable.
This is the tube made of pyrex glass.
And this thread holds it all together.
Inside there are silicone sealing rings
so there is no leakage.
So that's the difference.
You can disassemble this one.
I'll get a bottle of liquid.
And I'll fill it up straight away.
We have to be carefull and fill it along the side so we won't pour liquid into the center.
Again, this atomizer has the coil placed at the bottom.
Ok, that should be enough.
Now I'll just screw the base in.
Turn it around, let it soak up and it's ready.
The container holds around 1,2 - 1,3 ml of liquid.
Let's do some measuring.
It weighs 32 grams.
The total lenght is almost 76 mm.
The thread is 10,22 mm deep.
The diameter is almost 14 mm.
So it's designed for the eGo batteries.
Kanger ProTank Mini 2.
Dismountable clearomizer made of the pyrex glass.
There's no problem with this device I think.
As I said, it's designed for the eGo battery
and it looks good on it.
And it smokes good.
Even on the eGo battery it smokes really well.
You can use some other device with the eGo thread,
so I'll use the H200 mod.
I'll measure the resistance again.
It's 2,6 ohm.
So I'll set it around 3,7 V.
It tastes good, it smokes good, there's nothing else to say.
So that is Kanger ProTank Mini 2.
Goodbye and see you next time.