Tip:
Highlight text to annotate it
X
It is the product called the AV outlet.
I made an AV terminal and a communication terminal in the form such as the power supply connector.
This is our original standard.
It is the design that a terminal is contained in to six.
This put our connector in the face plate of other companies.
This enters to three of one.
Our thing enters to six.
Because it is incompatible, it is necessary to use the same plate.
The back uses the connector of the snap-in.
Then I put the snap-in cable which drew us's original cable together.
It is necessary to use the thing in accord with the verge cable using the broadcast connector.
The verge using our cable has to use the exclusive cable.
In the case of an outlet, the other side attaches an outlet here.
When I prick the terminal directly, I prepare a cable of the conversion.
When I put it in the box of other companies, a cable bends top and bottom 90 degrees.
Even if a wall surface is thin, it is usable.
The thickness of the wall surface is necessary to stab a cable in the case of a broadcast connector.