Tip:
Highlight text to annotate it
X
Failure to follow these installation instructions and not using the
provided hardware can damage the intake tube, throttle body, and engine of
your vehicle. The tools you'll need to install performance air intake
systems 631122 or 631122P include: a 3/16 inch and 5/16 inch Allen wrench,
3/4 inch wrench, a flat blade screwdriver, a ratchet and extension, a 7/16
inch socket and a T27 torque socket.
Let's get started. First, turn off your vehicle's ignition and disconnect
the negative battery cable. Remove the air filter bolt and air filter
cover. Loosen the three air filter retaining bolts. Remove the air filter
from the vehicle and disconnect the crankcase breather tubes. Remove the
two breather air filter base mounting bolts. Remove the air filter base
from the vehicle. Install the supplied crankcase breather tube using
provided breather bolts and washers. (Note: place one washer on each side
of the breather tube.)
Trim the provided Crankcase breather hose to a length of 1 1/2 inches and
then install it onto the K&N intake tube. Apply a drop of the provided
Locktite to the threads of the intake tube mounting bolts. Install the K&N
intake tube onto the throttle body along with the provided gasket and
secure it with the provided mounting bolts. Install the provided K&N filter
and secure with the provided hose clamp. Note: the K&N high flow intake
system is a performance product that can be used safely during mild weather
conditions.
During harsh and inclement weather conditions, you must install the K&N dry
charger onto the air filter. Failure to follow these instructions can void
your warranty. It will be necessary for all K&N high flow intake systems to
be checked periodically for realignment, clearance and tightening of all
connections.
After 100 miles of driving, check the nuts and bolts in your air intake
performance system and re-tighten if necessary. Failure to follow the
installation instructions or perform proper maintenance may void your
warranty, so remember to review the instruction sheet and make sure all
steps were followed.