Tip:
Highlight text to annotate it
X
not by the scope
it's an custom airsoft gun of SWU sniper rifle
a bullpup Dragunov
it's nice to have a Russian speaking friend
you can hire him as he's unemployed
he speaks English, Russian, Ukrainian, Belorussian and what else?
I'm learning German
what was it at the beginning?
Dragunow from Cyma
sometime ago you made a review of this baby
I decided to make something out of it
the motor is hidden in this stock
it's a stock that had two lives
the 1st one was awful and I learnt a lesson
a lot of people complained that the stock was fugly
so I remade it and now it's much better
does it look like the original? yes, it does
it's made from bent plexiglas
did you have to work on motor cage? no, it's normal
motor screw is here
you can easily dissassembly the whole thing
what else? the receiver is the same
i'm going to linish the side mount here
and then special grille will be added
because in the real steel version the part of the trigger mechanism is moved on the outside
and the fake grille would imitate the real steel one
how did you moved the trigger? inside the replica
my hicap, that I use to smash potatoes
as you can see there's a latch inside
made from copper wire
on the board with tanks there's a thread where everything is shown
there are no tank there. no tanks?
I heard there are going to be airplanes now
we're just mocking :D
next is dummy bolt
nothing change, everything is as in original Cyma Dragunov
front handguard is wooden
cut to fit
they are wooden?! yes
in the original SVU they are plastic, right? yes
you covered them with some kind of rubber, didn't you?
no, I painted it four times
if you didn't tell me, I wouldn't quess that they are wooden
it's Cyma's original wooden handguard but painted four times
the handguard I got was pretty good
I didn't have to fill the imperfections
I just linished it in some places
the wood stayed in it's place as sometimes wood like to move after paiting
are the handguard interchangable with Dragunov's?
no can do, mate
here is a cut-out that differs SVU from Dragunov
maybe you could install them but they wouldn't work
so they just look similar
in SVU I had to cut them out to fit
there are a couple of tin stripes glued
this is your custom work? yes, all mine
pistol grip was taken from L85
trigger guard is from SVD
Belomo 6x42 optics
if someone didn't believe
side rail is original too
so you had to move the side mount
yeah, I didn't want to spend additional 50pln (15euro) for something completely useless
right, as the whole thing is already impressive
you don't see the mount anyway
gas block is the same but I've lost one part
it's a complete blend of everything I had
is the front sight flip-up in the real steel, too? yes
it differs from the original which has a rod
I used a flat bar
it's not perfect but looks great
the base of the sight is from SVD
next the flat bar is from SR25
and the top is from SVD
the silencer is just a dummy
I wanted to keep the inner barrel as long as possible
you can take it off but then you'll see the barrel
I didn't want to reduce the range
the flashhider is taken from ak74
Does it look like the real steel? yes, it does
well, it's a sniper rifle so it should whack a lot
it has, we haven't chronoed it
but it has more than 500fps
It has an m140 Guarder spring
you can hear the power of 500fps
do you know how to use bullpups? I have no bloody idea!
really nice
niceeee
does the safety laver work?
unfortunately not
because in the original one the whole mechanism is blocked
unlike V3 gearbox where you block inside from the outside
here I could block the outside element from the outside
but I removed that part
I plan to install a mosfet unit with a safety function
so until then, my finger is my safety switch