Tip:
Highlight text to annotate it
X
Hi I'm Mike Rogers and we are making this video for expertvillage.com on the use of
mid welder. Our next project would be how to create a simple lap joint. This is technique
often requires for joining any manner of piece of steel when you need to extend them or you
need to build them up, we need to join a fill of metal to a thicker metal. Very simple,
very straight forward all we need to do is prepare our steel as long it is relatively
clean if you have a lot of rust that is fine. Lay the two together and clamp them in the
exact position where you want the finish piece. Clamp carefully. Line it up as you as matter
of fact you would measure it to make sure it position ... Next we would attach weld
the two items together. S clamp don't forget. Yes we are now going to carefully talc weld
to keep this into position. Again. Again. Again. Okay now you could see that we talc
weld it. The two pieces here together this is going to hold it secure the position and
then we could double check that it is accurate position before we finally weld our pieces
together. Close your eyes. Ready. So we have the two pieces simply not welded together.
That would form a permanent join in the two pieces of steel.