Tip:
Highlight text to annotate it
X
Sending in our 2013 Hyundai Elantra. We'll be installing the Roadmaster Tail Light Wiring
Kit with Bulbs, Part Number RM-155. To begin with here, we'll take the long wire that
has a plug on both ends. We'll actually snip one of the plugs off because we will
not be needing it on this particular application. Now, as you can see, this vehicle already
has the baseplate installed on it, so we'll be rodding the wire and tying it in right
near the center of the baseplate area. To rod our wire, we will be using an old section
of airline tubing to help us pull the wire through the inching department and underneath
the vehicle. We're going to go ahead and take our piece of airline tubing and start
from the engine compartment and rod it down in front of the radiator where we'll pull
the four-flat out. Now, it's a good idea to leave a little extra wiring here in case
you want to add the different style plug instead of the four-flat, whether it'd be a four
or
six
round
at
a later time.