Tip:
Highlight text to annotate it
X
I made this video for you to show you how to set up the cords
when you are done installing the structure, put up the stairs, 4 stairs
you start attaching over here
from right to left
so ONE cord goes from here to here
when you are here,
do not hesitate to continue directly to other side of the corner
i'm thus giving you 4 cords for the 4 corners
Now, I will show you with a miniature version of the structure
to show you how to attach the cord
Lets start.
Use wool cords to achieve this knot (I only have cotton here)
it should be wide like this
There are different ways to go,
but I suggest to do it like me
[follow visual explanations]
[follow visual explanations]
[follow visual explanations]
[follow visual explanations]
[follow visual explanations]
attach really tight
I make it go through this spot
and pull strongly from the other end
Do two or three knots
You can cut this end
We will attach this end here.
I will replace the real size cord with a small one
to show you how to properly attach it.
There is a little stick
This is the exterior, and this is the interior
Attach first from interior
and continue
Im now replacing the cord with the small one
so after it's attached, move to the other end
the entire cord, which is really heavy,
should remain on the floor to avoid lifting it every time
now, to attach it on the other end
[follow visual explanations ]
make a little twist to the right,
because we will move to the left afterwards
then attach it like this to the structure
and pull until it's really tight
then again
and again
here again, make the twist to the right
and attach on interior
[follow visual description from now on]
twist to the right
and finish with the same knot we did at the beginning.