Tip:
Highlight text to annotate it
X
中心鎖附式轉接座安裝教學 Center Lock Adaptor Installation Instruction
所需工具 tools
先將轉接座裝於花鼓的裝配面上 Mount the adapter on the mounting surface of the hub
使用3mm六角板手,並鎖上束緊螺絲
鎖緊扭力 4~6Nm at a torque of 4~6Nm
使用T25板手將碟盤螺絲依序穿過墊片 Using a T25 wrench, let the rotor screws pass through spacer
先用手輕輕將碟盤螺絲依序鎖上
碟盤螺絲須依對角順序鎖上 The rotor screws shall be mounted diagonally
鎖緊扭力 6~8Nm at a torque of 6-8Nm
將鎖環鎖於花鼓上 Tighten the lock ring on the hub with tightening torque 40Nm
使用鎖環工具板手鎖緊,鎖緊扭力 40Nm Tighten the lock ring on the hub with tightening torque 40Nm
完成 end �