Tip:
Highlight text to annotate it
X
Today on our 2006 Toyota Sienna, we'll be test fitting the Kua Sherpa Hitch Mounted
2 Bike Rack with Wheel Mount Cradles, Part Number S102. Now to begin our test fit, we'll
slide the bike rack shank into the hitch, line up the hitch pin hole, and slide the
hitch pin in. We can then move to the back of the shank where we can tighten that down
securing the bike rack to the vehicle. We'll now and go ahead, and give you a few measurements.
Our ground clearance here at the bottom of the bike rack is 11 inches and from the closest
point of the bike rack with the bike rack in the stored position to the back of the
vehicle measures 2-1/2 inches. We'll now go ahead and pull the handle and unfold the platform.
With the platform down, we've added about 28-1/2 inches of overall length to the vehicle.
We'll now go ahead and open the cargo door. As you can see, we can get access to the cargo
area with this bike rack secured to the vehicle. We'll now to ahead and unfold the front wheel
clamp and make sure it's fully extended. We also want to make sure that the wheel loop
strap is undone and out
of
the way.