Tip:
Highlight text to annotate it
X
This system that eliminate lippage in tile installation 0:04:00.000,0:08:00.500 Adjust the pliers leveling in the scale as the thickness of the Tile 0:09:00.000,0:17:0.000 set the screw of the pliers, and the tool is ready to work 0:20:0.500,0:25:.000 When the adhesive is widespread with a notched trowel, place the crosshead on the 4 corners of the tile (5cm approx.) 0:25:25.100,0:30:30.000 choosing the crosshead according to the joint width you want to leave (we have self-leveling crossheads 1, 2 and 3mm). 0:30:00.200,0:35:00.000 Place the ceramic tile and settle it with a rubber mallet. 0:35:00.200,0:38:00.000 For larger sizes, we recommend to use more spacers in each side of the piece. 0:42:00.200,0:51:00.000 proceed to place the tiles and the bases adjacent, repeating the same operation 0:59:00.200,1:00:00.000 Insert wedges in the leveling crosshead. Press the wedge until locking it perfectly. 1:23:00.000,1:28:00.000 Place the tool on the leveling crosshead. Once set, tighten until the bottom of the tool lever. 1:28:0.100,1:32:00.000 with this operation we have the tiles without lippage 4:17:0.100,4:24:0.000 When the leveling crossheads are adjusted, set the enough time before removing the crossheads. 4:24:0.100,4:26:00.000 Respect the setting times and traffic indicated in the adhesive data sheet. 4:26:00.100,0:04:30.000 When set, remove the leveling pieces. 4:30:00.100,4:38:00.000 For this, hit with a rubber mallet or foot on the side of the crosshead and in the direction of the board. 4:38:00.100,4:45:00.000 Do not hit the wedge. The wedges can be retrieved for later use. 4:45:00.100,4:50:00.000 The wedges can be retrieved for later use. Finally, grout tiles. 5:55:0.100,5:59:00.000 Finally we can see how the floor has been completely without lippage 5:59:00.100,6:04:00.000 Although not required, it is recommended to introduce self-leveling crossheads in water before use.Thus, will increase its flexibility.