Tip:
Highlight text to annotate it
X
Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball
mount for 2-inch hitches with an 8 3/4-inch rise or a 10-inch drop rated at 10,000 pounds,
part number amsc10. Now before we begin our test fit we will first need to obtain the
hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver
tube, and we get a measurement of 24 inches. To begin our test fit in the drop position
well slide the shank of the ball mount into the opening of the hitch, line up our pin
holes, insert our pin through our pin holes, and secure it with the clip on the other side.
Well then measure from the ground to the top of the ball platform and well get a measurement
of 14 inches. Now using this ball mount in the rise position would not be designed for
this vehicle. When choosing a ball mount for your trailer you will first need to measure
your trailers ride height.