Tip:
Highlight text to annotate it
X
SPEAKER 1: We get quite a few inquiries
about how to remove the seats out of your Fox Mustang.
Fox seats are pretty easy, but most of the questions
revolve around the backseats, especially
for an '83 to '93 hatchback.
I'm going to show you just how easy it
is to take the seats out of your Mustang.
First thing you want to do is get your seats out of the car,
starting with the front.
Remove your front seat foot covers.
Use a 15-millimeter wrench to remove the two retaining nuts.
Slide the seat forward.
Lean the seat back forward.
Remove the two 15-millimeter bolts.
Lift the seat up.
Unplug the power seat track, if equipped,
as well as the power lumbar.
And remove from the vehicle.
Repeat these same steps on the other side.
To remove the rear seat, apply pressure
from the front of the seat toward the back
and lift upward.
That will release the retaining clips on the bottom.
Remove the rear seat bottom from the car.
Lower the rear seat backs down.
You've got three 1/2-inch bolts on each side.
Remove those bolts, and you can fold the bracket out of the way
and slide the rear seat back off of this inner pivot.
Repeat this for both sides.
And that's it.
All you need is just common hand tools
and a few minutes of your time.
For you coupe and convertible owners,
you actually have it just a little bit easier.
The rear seat bottoms come out the exact same way
as the hatch.
For coupe owners, once you get that bottom out of the way,
you'll see two screws holding down
lower tabs on that rear seat back.
Pull those screws out, lift up on the seat back, you're done.
For convertible owners, once that seat bottom is out
of the way, pull on the lower portion of the seat
back and push down on the top, and it'll
release the retaining tabs.
Now for more Mustang parts, tech, and how to,
check out latemodelrestoration.com.