Tip:
Highlight text to annotate it
X
Today on our 2007 Scion TC, well be test fitting the Pro series Q-slot platform style bike
carrier, Part # PS63134. Now to begin our test fit, well simply slide our bike rack
shank into the hitch right up the hitch pin hole then install our hitch pin. With that,
our bike rack is secured to the vehicle. Now well give you a few measurements. Our ground
clearance at the back of the bike rack is 13 1/2 inches. From the closest point of the
bike rack to the back of the vehicle is 6 inches.
Now well go ahead and unfold the bike rack platform and open our cargo door. As you can
see, we can gain full access to the cargo area opening the door completely. Were now
almost ready to load our bike, well need only to make sure that our wheel lube straps are
undone and out of the way and then our vertical bar clamps are completely extended. Well place
the bike into the wheel loops and bring our vertical bar up, remembering to reinstall
the pin holding the bar in place. We can then bring our vertical bar clamp down over the
top bar
of our bike.