Tip:
Highlight text to annotate it
X
Today on our 2014 Chrysler Town and Country, we'll be test fitting the Hollywood Racks
Traveler five-bike rack part number HR9200. We'll begin our test fit by sliding the
shank of the bike rack into the opening of the hitch while treading in our anti-rattle
bolt and then tightening it down using a wrench. With the bike rack secured, we'll go over
a couple of clearance measurements to see how the two fit together. We have about 12
inches of ground clearance at the rear of the bike rack. Closestpart of the bike rack
to the closest part of the vehicle is about 7 inches away and with the cradle arms pointing
down, we've added about 12.5 inches to the overall length of our Town and Country.
We now can loosen up the black knobs on both the upper left and right corner of the mast
to swing the cradle arms out.