Tip:
Highlight text to annotate it
X
this PC case is pretty special, but i'll talk about it later
52cm high, 46cm long, 28cm wide E-ATX mobo 9 PCI slot 4x 5.25" bays, 6x 3.5" and 4x 2.5" with 2 adaptors that take 1x 3.5" bay both and you can remove 3 top 3.5" bays to install an over 30cm GPU under 4th PCI slot
and about cooling, you can put a fan at front from 80 to 200mm and attach it where you want because of the line holes
one of the 5.25" cover that come with the case have front I/O 2x USB3 and USB2 + audio in/out
big IN WIN button is the power on and activity LED and the circle at it's left is reset/HDD acticity LED
at top you can put 3x 120mm fans, or 2x 140 to 200mm, or 1x 230mm above or under the line holes but there is only 1cm betwen this and top of the mobo
note : no lines on right pic because it's from an older vers of the case
the side panel is attached by 6 screws, it's a lot, but once the side it removed, it would be very easy to work in the case because there is a lot of holes and spaces everywhere
at right you see different kind of sides : steel with mesh / full mesh full window / full window with mesh (sorry for the aquarium effet on the window at left)
you can put 1 fan at rear from 80 to 140mm
maybe you have noticed some little transparent pads at fan places well they are rubber pads for vibrations and they come from a 5x5cm plate that you can cut and past as you need
you are probably wondering why this case is so much opened and have those thick corners well thats what is special about this case : it have a fabric cover over it (thats what the F-Frame stand for)
you can see some cover possibilities at right (didn't really had much idea for good ones ^^)
and with that, this case have a very easly customisable look (while it will always be unique) + should be dust free because there won't be big holes, but air can pass through the fiber there is a zipper at rear to install/remove it, and front buttons will be noticeable because they are lighted up