Tip:
Highlight text to annotate it
X
So in this segment we will be talking about how to reset your SVC battery-operated
controller
you'll notice ther is no display to begin with if you hit the center button the
display comes up
but what we're going to do is we're going to be removing
the battery
and to do that you're going to split the two halves it's a threaded half
unscrew the back
and you'll find the battery inside
I want you to remove the nine volt battery and it needs to set out for a full five
minutes
very important for for five minutes
don't cut yourself short on this because the controller will hold that memory
in the
SVC for a short period of time allowing you to replace the battery
and retain the information
so this needs to stay out for a full five minutes
now we're going to say the time has elapsed for the purposes of this video
and
what you're going to be doing is you are going to reinstall the battery but while you
reinstall it beforehand you have to have these three buttons held down
so the steps are as follows
you're gonna hold down
the plus,
minus and left arrow buttons together all three together at the same time
while they are being held down
you're gonna reinstall the battery
and once the battery is reinstalled
then you'll release
the three buttons on the front
and if you do this correctly you should show 12:00 in the display
so step one remove the battery step two wait for a full
five minutes step three hold down the plus, minus and left arrow buttons
together
step four reinstall the battery
and the final step
release the three buttons and if you do this correctly you should show 12:00
in the display