Tip:
Highlight text to annotate it
X
To create the walls we must use the button 'create walls'
Sometimes it is necessary to make an adjustment between two walls.
This requires the maximum zoom to visualize the difference of level. Left click on the wall that will be adjusted.
Put the cursor on the end wall and the cursor will change format. Hold the left mouse button press and adjust the wall.
There is another way to adjust a wall.
During the creation of the wall click the 'Enter 'on keyboard.
You can now put the values that correspond to: Length, angle and wall thickness.
To exit the creation of walls click the 'Escape'.
Sometimes the adjustment may be in the order of 1mm. Make a big zoom to verify that the walls are properly adjusted.