Tip:
Highlight text to annotate it
X
This is Vicki Walker for Expert Village. We are almost finished assembling the valance
and I have covered the buttons that we would use for decorations in the front. They would
be spaced evenly on the front and I think I would do them right around that area cause
we need to save the space here that we would be sewing/stapling that over the valance board.
Maybe down just a little. So I would start by sewing on the bottom button here by hand
and then the others I would space even after that. I have my needle and thread and I would
go all the way through from the bottom. Through the loop of the bottom of this button. Back
through the bottom. It would take a couple of loops through to make sure that the button
is sturdy and does not end up hanging to loose. Or loosely. Then I would repeat the same process
with the other 2 button just above. That is all it takes to get our buttons sewn to the
front and our next step would be attaching the valance to the valance board in the next
clip.