Tip:
Highlight text to annotate it
X
Welcome to buyspares. This video will show you how to change the brush roll
and sole plate
assembly on a Dyson DC04 vacuum cleaner.
Before replacing a part in any electrical appliance
you must ensure that the appliance is first unplugged from the mains.
As the parts of the appliance that come into contact with the floor
the sole plate and brush roll can be subject to a great deal of wear
damage from furniture.
Start by removing the canister from the Dyson.
This will enable you to rest it on a flat surface more easily.
Use a flat head screwdriver or coin
to unlock the three fasteners on the sole plate, then lift the sole plate off.
The brush roll is held in place by the belt, so to release the brush roll use
a screwdriver to firmly pull the belt back
on the motor spindle. The brush roll and belt can then be removed from the vacuum.
Place the new belt on to the motor spindle and push through the housing.
Then pass the brush roll through the belt and refit.
Turn the brush roll a few times to align the belt and make sure it won't come off the
spindle.
Attach the new sole plate by locating the tabs into the slot on the housing
and click into place and lock the three fasteners before finally reattaching the cannister
and cyclone assembly.
For all the spares you need visit
www.buyspares.co.uk