Tip:
Highlight text to annotate it
X
Then good morning!! this is my (first) video presentations
for a class I; using the horizontal layer
and the oblique layer technique. We start with the
Cavo-Surface-Angle. I don't place a bevel on it
I simply
I simply round the edges, this is what I'm doing right now, that's going to
favor adaptation
okay so after etching
the cavity will be dried
This is water. Then immediately after this light drying
it should not be over over dried, we apply immediately the adhesive and this is where
XP bond
is so versatile. because
it doesn't depend on an ideal humidity level of the dentin...
... then, after light
lightly drying the adhesive is cured for 10 seconds
here we see the application of SDR (Smart Dentin Replacement - Dentsply)
as a base remember that
SDR has flowable characteristics, but
its strong as a composite and it allows
a incremented thicknesses of 4 milimiters (to be placed)
its one of the options you have. One could have been placing this composite with a thin
layer of flowable.
and then (continue) with composite. I
chose to use SDR here here because it's a little more convenient
and then we have to light cure it. following the instructions
instructions for use and after that we
we can, if we still have space, add more composite
OR a little more SDR. SDR required
1.5 millimiters of clearance for the (subsequent) composite (occlusal layer)
and here I am placing a little more composite
it could have been SDR. My goal here is to create a reference, so
this layer should be more or less
one millimeter below the marginal ridges and that's gonna
act as a reference for the (subsequent) occlusal ayers
for the occlusal increments. You can see I
like to use the microbrush it could have been round instruments
and it is important to make sure
that we have space for the occlusal increments
this increment is not (placed) higher than the future Mesial-Distal groove, so
one millimeter below the marginal ridge
here I am
light curing each horizontally increment
it will be light cured for 20 seconds
or according to the instructions course
you can also
and a little more to undermined in emerald is
good place a good time for doing so you
hinion's reno instruments I don't think there's a place in composites industry
for sharp
flat instruments we want to use round shapes from the burst and
che to the condenser to the micro brush
here
like
in the last result increments and I'm
imagining with my own mind's eye where I want to sequence to be there is a lot of
references in these Official Rules
you need direction of the *** grooves I
I don't have time to call rieders so if you want more information
let's set hands-on hot the just let myself I guess
he and so let's proceed now after
invasion the future and netanyahu's on it and let's play Secret
your place in the equipment I like to use the cool people
because it allows me to shape n place the right volume
more or less first and make sure the composite is not
overlapping all the buckle area remove any excess
and that also applies for
the but who grew if you have any excess
for the media this program that as adjusted so yeah there's a low it says I
want to make sure your
well-defined but whose move the excess
better now than later I guess and the next step is to impact on margins you
know I like to use a micro brush
you can use around instruments again or her but you'd only that he's
in this case so make sure it's well adapted
because that you don't need to finish this and more just need those
he Robert point but no major
she here are defined in the secondary whose
I think they're very important to provide space
for the wounded healer excursions for movements of the antagonist
and for allowing you to please as much materials
possible ball so it's from
would when we play smart material we have a stronger restoration
we follow the not to me up because we follow the references now we liked your
remember just 34 seconds
this is a softer for enhanced build-up so
he buildup of the marginal rich I used the artistic technique meeting date:
with live the areas we are building up here I'm focusing
on this the label area of the oblique rich
tonight like a lot of time but you're gonna save a lot later on
because most likely to live to justice
so this is an advanced artistry it is
sculpting techniques I would be able to build up the whole
'em oblique reach in the loop is a little
reach at the same time so you know what I'm doing here on placing
litter stay so I can show the restoration to other dentists
this is not going to try and pitch if you will take place still much
remove the excess this model 18 is a
I'll and the group that created as little white stains please keep it do
low
the local level the plaza level is more or less in the mid August
so these days are not going away ross in the and
to contrast I also emphasize was
morton et you're not actually a me too good to might stay
so if you think you put too much just go ahead and remove the excess
with a clean my rush has gone and vitality to the restoration so you can
show to other interests
now I like to see on the lowest tuition you can do this with the flow of us a
preferably with the same brand of the composite you use
so she's FedEx *** for example you can use that its flow
or he's just a and remove the excess this is not a film
all the defects although Voice you're gonna have much easier finishing time
in much less likely to stay
here cure all the way done than 20 seconds
and the fishies really minimize them
just because she the margin lightly sometimes it doesn't think any truth to
that but
just in case fishies it's a matter of seconds
and you don't have to pitch to put too much effort
on this we will then know I just pollution
and follow with GE
polishing with it polishing paste this is present laws is a
till grit finishing polishing paste with a little oxide based
it works very well she's in there more like
polishing and hear the final restoration
richer than me correct correct and
it glows in space for you pollution a well-integrated restoration
well-defined inch
with region and the secondary group providing space for ninety
mended main dealer excursions
thank you very much it was a pleasure to have been nice lunch
I E I really wish you can come back at this time with a better camera so I can
show you more things
advanced techniques and have a good day but I