Tip:
Highlight text to annotate it
X
The new HD-Version of our WebUI hides a lot of new features.
The most important is the availability of the alarm-area function.
Until now, this was only possible in our InstarVision software.
Choose the alarm-area and activate it, now you can set up an new alarm-area.
With the moving bar you can change the sensibility of the motion alarm in this area.
The areas are can be deactivated, but stay the same until reactivation.
You will also find our alarm schedule to plan your security-plan during day- and nighttime.
There are already set up templates for day and night, but you can also invert and change it to adapt it to your needs.
The motion alarm can activate different alarm-events.
You can choose inbetween the standard 6-picture-e-mail, a recognition e-mail, a video recording on the built in SD-card and an FTP-upload.
It is also possible to activate and deactivate the external alarm-out.
If you use the relay-function you can change it's settings via the WebUI.
The menu point photo-series saves a row of photos on the SD-card, sends it per e-mail or uploads it onto a FTP server.
We run an own german DDNS-server to offer you own ddns-adresses for the remote control of your camera via the Internet.
Our own server secures a good support and and updates for a stable remote control.
Under Video it is possible to change the HD-stream settings to fit in your network.
You can change the framerate, bitrate and quality of the video-stream.
This gives you direct control over the amount of data being send.
The Picture settings over you to change the look of your live preview. To flip the picture if the camera is installed upside-down can be very useful.
The quick-start menu allows you to see the data saved on your internal SD-card.
Here you can find the saved pictures and videos.
The Snapshot function saves a snapshot on the SD-card.
Also the alarm-areas can be activated and deactivated via the quick-start menu.